'[MCU] ST STM32F429 STM32F439'에 해당되는 글 1건

  1. [MCU] ST STM32F429 STM32F439 1

[MCU] ST STM32F429 STM32F439


ST에서 또 신규 디바이스..

Cortex-M4 에 RGB LCD Interface + SDRAM Interface 을 넣어 놨습니다.

만쉐!!!!!

첨부 Brochure 참고..



brstm32f4.pdf



http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1577/LN1806


• LCD TFT controller

• Up to SVGA format (800x600)

• Up to 24-bit RGB parallel pixel output

• 2‑layer support with blending

• Flexible memory interface with SDRAM support: up to 84 MHz,32‑bit parallel



근데 따로 내부 cache을 가져 가지 않을 텐데 외부 SDRAM속도가 나올려나 모르겠네요.

나중에 UM 나오면 자세히 봐야 겠습니다.


Package도 이쁘게 208LQFP 도 나와 주시공....

UART도 매핑 잘하면 8개까지 사용 하겠네요...


아직 EVK이랑 IC는 풀리지 않았네요...2~3달 기달려야 할 듯




STM32F429BG

High-performance and DSP with FPU, ARM Cortex-M4 MCU with 1 Mbyte Flash, 180 MHz CPU, Art Accelerator, SDRAM, TFT
  • PreviewPreview

The STM32F429xx devices is based on the high-performance ARM®Cortex™-M4 32-bit RISC core operating at a frequency of up to 180 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security. The Cortex-M4 core with FPU will be referred to as Cortex-M4F throughout this document.

The STM32F429xx devices incorporates high-speed embedded memories (Flash memory up to 2 Mbyte, up to 256 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB buses and a 32-bit multi-AHB bus matrix.

All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG). They also feature standard and advanced communication interfaces.

pdfDownload Datasheet

Key Features

  • Core: ARM 32-bit Cortex™-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 180 MHz, MPU, 225 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
  • MemoriesUp to 2 MB of Flash memory organized into two banks allowing read-while-writeUp to 256+4 KB of SRAM including 64-KB of CCM (core coupled memory) data RAMFlexible external memory controller with up to 32-bit data bus: SRAM,PSRAM,SDRAM, Compact Flash/NOR/NAND memories
  • LCD parallel interface, 8080/6800 modes
  • LCD-TFT controller up to VGA resolution with dedicated Chrom-ART Accelerator™ for enhanced graphic content creation (DMA2D)
  • Clock, reset and supply management1.8 V to 3.6 V application supply and I/OsPOR, PDR, PVD and BOR4-to-26 MHz crystal oscillatorInternal 16 MHz factory-trimmed RC (1% accuracy)32 kHz oscillator for RTC with calibrationInternal 32 kHz RC with calibrationSleep, Stop and Standby modesVBATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM
  • 3×12-bit, 2.4 MSPS ADC: up to 24 channels and 7.2 MSPS in triple interleaved mode
  • 2×12-bit D/A converters
  • General-purpose DMA: 16-stream DMA controller with FIFOs and burst support
  • Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 180 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
  • Debug modeSerial wire debug (SWD) & JTAG interfacesCortex-M4 Embedded Trace Macrocell™
  • Up to 168 I/O ports with interrupt capabilityUp to 164 fast I/Os up to 84 MHzUp to 166 5 V-tolerant I/Os
  • Up to 21 communication interfacesUp to 3 × I2C interfaces (SMBus/PMBus)Up to 4 USARTs/4 UARTs (11.25 Mbit/s, ISO7816 interface, LIN, IrDA, modem control)Up to 6 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S for audio class accuracy via internal audio PLL or external clock1 x SAI (serial audio interface)2 × CAN (2.0B Active) and SDIO interface
  • Advanced connectivityUSB 2.0 full-speed device/host/OTG controller with on-chip PHYUSB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII
  • 8- to 14-bit parallel camera interface up to 54 MBs/s
  • True random number generator
  • CRC calculation unit
  • 96-bit unique ID
  • RTC: subsecond accuracy, hardware calendar